Model: SBS40
Hãng sản xuất: STUART (BIBBY) – Anh
Xuất xứ: English
Bảo hành: 12 tháng
Thông số kỹ thuật:
- Thể tích: 24 lít
- Khoảng nhiệt độ: Môi trường +50C … 99.9°C
- Độ ổn định: ±0.25°C
- Tốc độ lắc: 20 – 130 vòng/phút
- Quỹ đạo lắc / Biên độ lắc: 20mm
- Bên trong bể làm bằng thép không gỉ
- Điều khiển nhiệt độ và tốc độ lắc bằng điện tử
- Cài đặt nhiệt độ và hiển thị nhiệt độ thật trong bể
- Nhiệt độ hiển thị bằng màn hình LED
- Có chức năng bảo vệ quá nhiệt. Có sensor báo mực nước thấp
- Mặt lắc phù hợp với bình tam giác 8 x 250ml hoặc 6 x 500 ml hoặc 4 x 1000ml
- Kích thước trong: 300 x 500 x 200mm
- Kích thước ngoài: 335 x 580 x 330 mm
- Khối lượng: 17 kg
- Điện: 230V, 50Hz, 1400W
Cung cấp bao gồm:
+ Bể cách thủy lắc điện tử hiện số model SBS40
+ Dây nguồn và hướng dẫn sử dụng
Shaking water bath, SBS40
Choice of linear or orbital shaking action
Digital display and selection of temperature
Low level water sensor
Integral drain
Range of accessories
A water bath with integral shaking, a choice of platform* is available to provide linear or orbital shaking action. The platforms require no special fitting and use strong magnets, which couple to the drive unit underneath the stainless steel tank. Vessels are securely held in place on the stainless steel platforms by a series of high-tension springs, which will accommodate almost any size and combination of vessel. The heater is mounted underneath the tank to allow easy cleaning. A low-level water sensor causes a warning to flash on the display to indicate when the water level is low, cutting power to the heater to prevent the bath from boiling dry. A drain is also incorporated to aid emptying of the bath. The platforms will accommodate the following Erlenmeyer flasks: 8 x 250ml, or 6 x 500, or 4 x 1000ml capacity.
The speed and temperature controls are easy to use. The shaking speed is adjustable and electronic feedback control ensures accurately maintained speed. The water bath temperature is set and monitored via the easy to read LED display. In addition, the design incorporates an over temperature protection system that tracks the set temperature and controls the heater in the event of a fault. Minimum set temperature is 10°C.
A range of stainless steel accessories is available designed to accommodate popular tube types ranging from 1.5ml micro tubes up to 50ml centrifuge tubes. A choice of cover is also available, designed to reduce heat loss and evaporation in either stainless steel or plastic. The polycarbonate cover allows the cover to be hinged either side of the bath depending on working conditions and preference.
*Please note Shaking Platforms must be ordered separately
| Capacity | 24L |
|---|---|
| Temperature range | +10°C to 95°C** |
| Temperature stability | ± 0.25°C |
| Shaking speed | From 20 upto 130rpm |
| Shaking orbitamplitude | 20mm |
| Internal dimensions (w x d x h) | 300 x 500 x 200 mm |
| Overall dimensions (w x d x h) | 335 x 580 x 330 mm |
| Net weight | 17kg |
| Electrical supply | 230V, 50hz, 1400W |
| Model | Description |
| SBS40 | Water bath, shaking (without platform) |
| SBS40/ 1 | Platform, linear shaking action |
| SBS40/ 2 | Platform, orbital shaking action |
| SBS40/ 3 | Platform, perforated |
| SBS40/ 4 | Polycarbonate cover, hinged |
| SWB3/ 1 | Stainless steel cover |
| SBS40/ 5 | Test tube rack, 143 x 1.5ml micro tubes |
| SBS40/ 6 | Test tube rack, 120 x 13mm culture tubes |
| SBS40/ 7 | Test tube rack, 72 x 16mm culture tubes |
| SBS40/ 8 | Test tube rack, 56 x 15ml centrifuge tubes |
| SBS40/ 9 | Test tube rack, 30 x 26mm culture tubes |
| SBS40/ 10 | Test tube rack, 25 x 50ml centrifuge tubes |
*Please Note: There is a gap between the edge of the SBS40 and the SBS40/4 to allow excess steam to escape and condensate to fall back into the bath. This is a design intent and not a fault as a leak tight seal would create an unsafe pressure chamber.
**Please note: An accessory polycarbonate or stainless steel cover is required to reach the maximum temperature of 95°C
Bảo đảm chất lượng
Sản phẩm bảo đảm chất lượng.
Hotline 24/7
Hotline: 085 996 3888
Sản phẩm chính hãng
Sản phẩm nhập khẩu chính hãng
