Máy đo điện trở đất và điện trở suất Sonel MRU-30 (3p, 4p)

Model: MRU-30
Hãng sản xuất: SONEL
Xuất xứ: Ba Lan
Bảo hành: 12 tháng
Liên hệ
Tình trạng: Còn hàng
Điện thoại: 0976595968

Model: MRU-30
Hãng sản xuất: SONEL
Xuất xứ: Ba lan
Bảo hành 12 tháng
Thông số kỹ thuật:
Đo điện áp nhiễu:
- 0...100 V/ 1 V /±(10% m.v + 3 digits)
Đo lường tính liên tục của dây dẫn:
- 0,00...9,99 Ω / 0,01 Ω / ±(2% m.v. + 3 digits)
- 10,0...99,9 Ω    / 0,1 Ω / ±(2% m.v. + 3 digits)
- 100...1999 Ω    / 1 Ω / ±(2% m.v. + 3 digits)
Đo điện trở đất (phương pháp 3- và 4-cực):
- 0,00...19,99 Ω/ 0,01 Ω /±(3% m.v. + 3 digits)
- 20,0...199,9 Ω/ 0,1 Ω /±(3% m.v. + 3 digits)
- 200Ω...1999 Ω/±5% m.v
- 2000...9999 Ω / 1 Ω /±8% m.v
Đo điện trở đất sử dụng ampe kìm và điện cực phụ (3 cực + kìm đo) (Chọn mua thêm kìm)
- 0,00...19,99 Ω / 0,01 Ω / ±(3% m.v. + 3 digits)
- 20,0...199,9 Ω /0,1 Ω / ±(3% m.v. + 3 digits)
- 200...1999 Ω /1 Ω /±5% m.v.
- 2000...9999 Ω / 1 Ω / ±8% m.v.
Đo điện trở của điện cực phụ RH và RS
- 0...999 Ω/ 1 Ω / ±(5% m.v.+ 8 digits)
- 1,00k...9,99 kΩ/ 0,01 kΩ / ±(5% m.v.+ 8 digits)
- 10,0k...19,9 kΩ/ 0,1 kΩ / ±(5% m.v.+ 8 digits)
Đo điện trở đất sử dụng 2 kìm đo (mua kim clamp)
- 0,00..19,99 Ω/ 0,01 Ω / ±(10% m.v. + 8 digits)
- 20,0...99,9 Ω / 0,1 Ω /±(20% m.v. + 3 digits)
Đo điện trở suất của đất
- 0,00...9,99 Ωm / 0,01 Ωm
- 10,0...99,9 Ωm /0,1 Ωm     
- 100...999 Ωm /1 Ωm
- 1,00...9,99 kΩm /0,01 kΩm
- 10,0...99,9 kΩm /0,1 kΩm
- 100...999 kΩm /1 kΩm
Kích thước 200x150x74mm
Phụ kiện kèm theo:
- 1 dây dài 2,2m
- Cuộn dây màu đỏ 25m
- Cuộn dây màu vàng 50m
- 01 kẹp cá sấu
- 02 cọc tiếp đất
- Dây test màu đỏ 1,2m
- Đầu dò 1kV
- Adapter
- Cáp USB
- Túi đựng máy chính
- Túi đựng toàn bộ phụ kiện
- HDSD


 


 

DESCRIPTION

The Sonel MRU-30 uses most known methods of earth resistance measurements. Tests can be performed using the 3-pole, 4-pole, 3-pole with auxiliary clamp and also, additionally, the MRU-30 employs the two clamp method of measurement, without the use of auxiliary test rods which can't be used in some situations. Complementary features of the MRU-30 are measurements of soil resistivity, continuity measurement of protective and equipotential conductors and, using clamps, leakage currents and interference voltages.

  • Robust and weatherproof (IP65) - no ingress of dust, water protected by a nozzle against enclosure from any direction.
  • Ergonomic casing - small and handy casing to make the measurements more convenient than before.
  • Built-in rechargeable battery - saving time to replace flat batteries; can be recharged from Power Bank and Cigarette Lighter Socket!
  • Clear on-screen notes - displayed on screen before and after the measurement to alert user of possible dangers and irregularities.
  • Many measurement methods available in a small, portable casing.
  • It allows to take the measurements of:

    • earthing resistance using auxiliary electrodes,
    • earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
    • earthing resistance using double clamps for measuring multiple earthing without underground connections.
    • ground resistivity (Wenner method),
    • continuity of equipotential bondings and protective
    • conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.

    Additionally:

    • measurement of resistance of auxiliary electrodes RS and RH,  
    • measurement of interference voltage,
    • measurement in the presence of interference voltage in the power network                        
    • with frequency 50Hz, 60Hz,
    • selection of maximum measuring voltage (25V and 50V),
    • introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
    • memory of 990 measurements (10 banks of 99 cells each),
    • calibration of clamp used,
    • data transmission to the computer (USB),
    • indication of battery state.

    Measurement of interference voltage UN (RMS)

    Range Resolution Accuracy
    0...100 V 1 V ±(10% m.v. + 1 digit)

    Measurement of continuity of equipotential bondings and protective conductors (Rcont)
    measurement range to IEC 61557-4:2007: 0,13 Ω...1999 Ω

    Range Resolution Accuracy
    0,00...9,99 Ω 0,01 Ω ±(2% m.v. + 3 digits)
    10,0...99,9 Ω 0,1 Ω
    100...1999 Ω 1 Ω

    • measurement current: under short circuit >200mA
    • frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)

    Measurement of earthing resistance (method 3- and 4-pole)
    measurement range to IEC 61557-5:2007: 0,53 Ω...9999 Ω (dla 50 V)

    Range Resolution Accuracy
    0,00...19,99 Ω 0,01 Ω ±(3% m.v. + 3 digits)
    20,0...199,9 Ω 0,1 Ω
    200,0...1999 Ω 1 Ω ±5% m.v.
    2000...9999 Ω 1 Ω ±8% m.v.

    • measurement current: under short circuit >20 mA,
    • voltage on open terminals: selectable 25 V AC or 50 V AC,
    • frequency of measurement current: 125 Hz (for networks 50 Hz) or 150 Hz (for 60 Hz).

    Measurement of multiple earthing esistance with using the clamp and auxiliary electrodes (3p + clamp)

    Range Resolution Accuracy
    0,00...19,99 Ω 0,01 Ω ±(3% m.v. + 3 digits)
    20,0...199,9 Ω 0,1 Ω
    200...1999 Ω 1 Ω ±5% m.v.
    2000...9999 Ω 1 Ω ±8% m.v.

    • voltage on open terminals: selectable 25 V AC or 50 V AC,
    • measurement current: under short circuit >20 mA,
    • frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)
     

    Measurement of resistance of auxiliary electrodes RH i RS

    Range Resolution Accuracy
    0...999 Ω 1 Ω
    ±(5% m.v.+ 8 digits)
    1,00k...9,99 kΩ 0,01 kΩ
    10,0k...19,9 kΩ 0,1 kΩ

     

    Measurement of multiple earthing resistance with using double clamps

    Range Resolution Accuracy
    0,00...19,99 Ω 0,01 Ω ±(10% m.v. + 8 digits)
    20,0...99,9 Ω 0,1 Ω ±(20% m.v. + 3 digits)

    • frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz
      (for networks 60 Hz)

    Measurement of ground resistivity 
    Measurement method: Wenner, ρ=2πLRE

    Range Resolution Accuracy
    0,00...9,99 Ωm 0,01 Ωm depending on measurement
    accuracy RE with 4p method,
    but not less than ±1 digit
    10,0...99,9 Ωm 0,1 Ωm
    100...999 Ωm 1 Ωm

    1,00...9,99 kΩm

    0,01 kΩm
    10,0...99,9 kΩm 0,1 kΩm
    100...999 kΩm 1 kΩm

    L – distance between probes: 1...50 m.. or 1...150 ft

    Electric security:

    • type of insulation: double, according to EN 61010-1 i IEC 61557,
    • measurement category: CAT III 300V wg EN 61010-1,
    • protection class acc. to EN 60529: IP65,

    Rated operational conditions:

    • operation temperature: -10...+55°C,
    • storage temperature: -20...+80°C,
    • humidity: 20...90%,

    Other technical data:

    • LCD display: segment, backlit,
    • dimensions: 200x150x74 mm.

 

 

     

     

      Bảo đảm chất lượng

      Bảo đảm chất lượng

      Sản phẩm bảo đảm chất lượng.
      Hotline 24/7

      Hotline 24/7

      Hotline: 085 996 3888
      Sản phẩm chính hãng

      Sản phẩm chính hãng

      Sản phẩm nhập khẩu chính hãng

      Sản phẩm bạn đã xem

      popup

      Số lượng:

      Tổng tiền:

      DANH MỤC
      DANH MỤC SẢN PHẨM