Hãng sản xuất: Delmhorst
Xuất xứ: USA
Bảo hành: 12 tháng
Thông số kỹ thuật:
Giải đo Gỗ: 6%-40%
Giải đo thạch cao: 0.2%-50%
Lưu giữ trung bình 100 giá trị đo
Kiểm tra hiệu chuẩn tích hợp bên trong
Cảnh báo bằng âm thanh khi đạt mức dài đặt trước.
Đầu nối thích hợp với nhiều loại đầu đo.
Thân máy chắc chắn đảm bảo sử dụng lâu dài
Hộp đựng bằng nhựa
Nguồn: Pin 9V
Kich thước: 8” x 3” x 1 5/8”.
Trọng lượng: 284g
Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:
Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications:
2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration.
The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications:
Also available as the 26-ED, which includes gauge to measure pin penetration depth.
The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4".
Great for use on roofs, insulation, or EIFS.
21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas.
Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.
22-E is also available as the 22-ET with a tapped handle for hard to reach areas.
Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding.
Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough.
Bảo đảm chất lượngSản phẩm bảo đảm chất lượng.
Sản phẩm chính hãngSản phẩm nhập khẩu chính hãng