Máy đo độ bám dính sơn bán tự động PosiTest ATM50A

Key Features...

• Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
• Pull Rate Indicator to manually monitor and adjust the rate of pull
• Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
• Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
• 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
  - 10 mm: 10000 psi (70 MPa)
  - 14 mm: 6000 psi (40 MPa)
  - 20 mm: 3000 psi (20 MPa)
  - 50 mm: 480 psi (3.3 MPa)
  - 50x50 mm: 375 psi (2.585 MPa)
• Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
• Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls
• Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data
• Software Updates via web keep your instrument current

4 Manual Models Available

Adhesion testers include everything needed for testing: Manual Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet and video, Certificate of Calibration traceable to NIST, two-year warranty, and a sturdy, lightweight carrying case^

* Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off).

^ Upgrade to the Pelican® case by adding a '-P' to the Ordering Code.

Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others

Accessories

PosiTest AT Verifier

Ideal for checking the accuracy and operation of PosiTest Adhesion Testers and is an important component in fulfilling both ISO and in-house quality control requirements.

Learn MorePelican Case for PosiTest AT Pull-Off Adhesion Testers

Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument.

Learn More50 mm C1583 Conversion Kit

Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm dollies conforming to ASTM C1583. Ideal for concrete surfaces and overlays.

Learn More50 mm x 50 mm Tile Conversion Kit

Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm x 50 mm square dollies conforming to BS EN 12004-2. Ideal for cementitious adhesive for tiles.

Learn More50 mm Conversion Kit

Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies. Ideal for lower bond strength finishes such as coatings on wood, concrete and plastic.

Learn More20 mm Conversion Kit

Interchangeable stand-off allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies. Ideal for high bond strength finishes such as coatings on metal.

Learn MoreDollies

Loading fixtures, stubs for adhesion testing.

Learn MoreDolly Multipacks

Larger quantity of dollies at a reduced cost.

Learn MoreDrilling Template for 50 mm Dollies

Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete.

Learn MoreGlue Kit

Additional glue, mixing sticks, palettes and cotton swabs.

PosiTest AT Quick Guide

PDF Document

PosiTest AT HTML Web Manual

Page Link

PosiTest AT Full Instruction Manual

PDF Document

PosiTest AT Literature

PDF Document