Máy Đo Độ Đục Và Bentonit Trong Rượu HI83749 (0.00 - 1200 NT)

Model: HI83749
Hãng sản xuất: Hanna
Xuất xứ: Rumani.
Bảo hành: 12 tháng
29.710.800₫
* Giá sản phẩm chưa bao gồm VAT
Tình trạng: Còn hàng
Điện thoại: 0976595968

Model: HI83749
Hãng sản xuất: HANNA
Xuất xứ: RUMANI
Bảo hành: 12 tháng
Thông số kỹ thuật:
-Thang đo: 0.00 to 9.99; 10.0 to 99.9; 100 to 1200 NTU
-Độ phân giải: 0.01; 0.1; 1 NTU
-Chọn thang: Tự động
-Độ chính xác: ±2% kết quả đo cộng 0.05 NTU
-Độ lặp lại: ±1% kết quả đo hoặc 0.02 NTU cho giá trị lớn hơn
-Ánh sáng lạc: < 0.05 NTU
-Máy dò ánh sáng: tế bào quang điện silicon
-Phương pháp: phương pháp tỷ lệ nephelometric
-Chế độ đo: bình thường, trung bình, liên tục
-Chuẩn độ đục: < 0.1, 10, 100, và 500 NTU
-Hiệu chuẩn: hai, ba hoặc bốn điểm
-Nguồn sáng; Đèn tungsten filament / lớn hơn 100,000 giá trị
-Màn hình: 60 x 90 mm có đèn nền
-Bộ nhớ: 200 bản ghi
-Kết nối: USB hoặc RS232
-Môi trường: 0 to 50°C (32 to 122°F), RH max 95% không ngưng tụ
-Nguồn: Pin 1.5V AA (4) / adapter 12 VDC; tự động tắt sau 15 phút không sử dụng
-Kích thước: 224 x 87 x 77 mm 
-Khối lượng: 512 g
-Cung cấp gồm: 9 được cung cấp với cuvet mẫu và nắp (6), thuốc thử bentocheck HI83749-0, cuvet chuẩn HI83749-11, dầu silicon, pipet tự động 1000 µl, ống thủy tinh có nắp 25 ml (4), ống tiêm 1 mL, khăn lau cuvet, pin, adapter 12 VDC, hướng dẫn và vali đựng máy.
-Bảo hành: 12 tháng

Details

The HI83749 Portable Turbidity and Bentocheck Meter is specially designed for measurement of turbidity in wine. The instrument is based on a state-of-the-art optical system which guarantees accurate results, assures long term stability, and minimizes stray light and color interferences. It also compensates for variations in intensity of the lamp, although proper calibration ensures measurements are fully validated, comparable, and in compliance with regulatory requirements. The 25 mm round cuvettes composed of special optical glass guarantee the repeatability of turbidity measurements.

 

Features at-a-glance

AMCO AEPA-1 Primary Turbidity Standard - The AMCO AEPA-1 supplied standards are recognized as a primary standard by the USEPA. These non-toxic standards are made of styrene divinylbenzene polymer spheres that are uniform in size and density. The standards are reusable and stable with a long shelf life.

Calibration – A two, three, or four-point turbidity calibration can be performed by using the supplied (<0.1, 10, 100, and 500 NTU) standards. Calibration points can be modified if user-prepared standards are used.

Fast Tracker - For users taking measurements throughout the winemaking process, the HI83749 is equipped with Fast Tracker - Tag Identi˜fication System (T.I.S.) that makes data collecting and management simpler than ever. Fast Tracker allows winemakers to record the time and location of a speci˜fic measurement or series of measurements using iButton tags on specific tanks for quick and easy readings. Each iButton® tag contains a computer chip with a unique identi˜cation code encased in stainless steel.

GLP Data – The HI83749 features complete GLP (Good Laboratory Practice) functions that allow traceability of the calibration conditions. Data includes calibration points, date, and time.

Data Logging – Up to 200 measurements can be stored in the internal memory and recalled at any time.

Data Transfer – For further storage or analysis options, logged data can be downloaded to a Windows compatible PC using the RS232 or USB port and the HI92000 software.

Backlit Display – A backlit LCD display provides an easy to understand, user-friendly interface. Displayed codes guide the user step-by-step through routine operation and calibration.


 

Significance of Use

Unrefined wine is quite turbid and hazy from suspended solids produced during fermentation. The unrefined wine is treated with fining agents to reduce cloudiness. This cloudiness is what winemakers refer to as protein haze, or haze for short. Thaumatin-like proteins (TLPs) and chitinases are the primary grape proteins responsible for haze formation. These positively charged proteins degenerate and stick together, resulting in undesirable flocculent clouds and visible haziness.  

The prevention of protein haze or deposit in bottled white wines is a universal concern and often a wine needs to be stabilized before bottling. One commonly used stabilization agent is bentonite. Bentonite is a volcanic clay earth type fining agent (like kaolin) that acts as a wine stabilizer. It improves the clarity of wine but has also negative aspects because of the volume of lees formed, reduction of tannin and color. Since there are different types and qualities of bentonite with different capacity of protein removal, it is important to make laboratory trials with the same lot and wetting degree of the bentonite as that will be used in the cellar.

Protein stabilization is normally not a problem in bottled red wines because of the relatively high concentration of phenols that binds and precipitates with the unstable proteins before bottling. Often bentonite is added to red wines at a level of about 12 g/hL (1 lb/1000 gal), reducing colloidal suspended particles thus improving membrane filterability.

Wines with low phenols contents, such as rose, light reds and whites should be checked for protein stability before bottling. Hanna offers a rapid test to verify the risk of future protein haze formation. If protein instability is detected, a next test can help defining the right amount of bentonite to be added for improving protein stability. It is important not to overdose bentonite, avoiding stripping wine flavour, body, and significant loss of color, especially in young red wines. Moreover, adding only the necessary amount of bentonite to obtain the desired protein stability results in a reduction of costs.

Winemakers can determine the initial turbidity of the unrefined wine with the HI83749 turbidity measurement instrument. After taking a turbidity reading the pre-made HI83749-20 Bentocheck Solution is added to the wine sample. A second turbidity measurement is taken. If the second turbidity reading is less than the initial turbidity reading plus 2 NTU, the wine can be considered stable. Otherwise a fining trial can be performed to determine the amount of bentonite that must be added to stabilize the wine.

 

Principal of Operation

To measure turbidity the HI83749 passes a light beam through the sample that is scattered in all directions. The intensity and pattern of the scattered light is a‰ffected by many variables, such as wavelength of the incident light, particle size and shape, refractive index, and color. The optical system of the HI83749 includes a tungsten fi˜lament lamp, a scattered light detector (90°) and a transmitted light detector (180°).

The HI83749 features a powerful microprocessor that calculates the NTU value from the signals that reach the two detectors. An eff‰ective algorithm is used to correct and compensate for any color interferneces. The optical system and measuring technique also compensate for fluctuations in lamp intensity, minimizing the need for frequent calibration.

Turbidity Specifications

Range 0.00 to 9.99; 10.0 to 99.9; 100 to 1200 NTU
Resolution 0.01; 0.1; 1 NTU
Range Selection automatic
Accuracy (@25ºC/77ºF) ±2% of reading plus 0.05 NTU
Repeatability ±1% of reading or 0.02 NTU, whichever is greater
Stray Light < 0.05 NTU
Light Detector silicon photocell
Method ratio nephelometric method
Measuring Mode normal, average, continuous
Turbidity Standards < 0.1, 10, 100, and 500 NTU
Calibration two, three, or four-point calibration

General Specifications

Light Source tungsten filament lamp / greater than 100,000 readings
Display 60 x 90 mm backlit LCD
Log Memory 200 records
Connectivity USB or RS232
Environment 0 to 50°C (32 to 122°F), RH max 95% non-condensing
Power Supply 1.5V AA alkaline batteries (4) or AC adapter; auto-off after 15 minutes of non-use
Dimensions 224 x 87 x 77 mm (8.8 x 3.4 x 3.0”)
Weight 512 g (18 oz.)
Ordering Information HI83749 is supplied with sample cuvettes and caps (6), 4 calibration cuvettes (HI83749-11), bentocheck reagent (HI83749-20), silicone oil (HI93703-58), 1000 μL automatic pipette with two tips and instructions sheet, 25 mL glass vials with caps (4), 1 mL syringe with two tips, funnel, filter paper (25), cuvette cleaning cloth, AC adapter, batteries, five tag holders with tags (HI 920005), instruction manual, instrument quality certificate, and rugged carrying case.

Hướng Dẫn Sử Dụng nhấn tải về HI83749

Catalog nhấn tải về HI83749

Bảo đảm chất lượng

Bảo đảm chất lượng

Sản phẩm bảo đảm chất lượng.
Hotline 24/7

Hotline 24/7

Hotline: 085 996 3888
Sản phẩm chính hãng

Sản phẩm chính hãng

Sản phẩm nhập khẩu chính hãng

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

DANH MỤC
DANH MỤC SẢN PHẨM