Máy đo EC/TDS/Nhiệt Độ Thang Cao HI99301 (0.00 to 20.00 mS/cm, 0.00 to 10.00 ppt)

Model: HI99301
Hãng sản xuất: Hanna
Xuất xứ: Rumani.
Bảo hành: 12 tháng
6.010.200₫
* Giá sản phẩm chưa bao gồm VAT
Tình trạng: Còn hàng
Điện thoại: 0976595968

Model: HI99301
Hãng sản xuất: HANNA
Xuất xứ: RUMANI
Bảo hành: 12 tháng
Thông số kỹ thuật:
Thang đo EC: 0.00 to 20.00 mS/cm
Độ phân giải EC: 0.01 mS/cm
Độ chính xác EC: ±2% FS
Thang đo TDS: 0.00 to 10.00 ppt (g/L)
Độ phân giải TDS: 0.01 ppt (g/L)
Độ chính xác TDS: ±2% F.S.
Thang đo Nhiệt độ: 0.0 to 60.0°C / 32.0 to 140.0°F
Độ phân giải Nhiệt độ: 0.1°C / 0.1°F
Độ chính xác Nhiệt độ: ±0.5°C /±1°F
Hiệu chuẩn: tự động, một điểm tại 12.88 mS/cm, 6.44 ppt (CONV 0.5)
Bù nhiệt độ EC/TDS: tự động, 0 to 60°C (32 to 140°F) với β điều chỉnh từ 0.0 to 2.4%/°C với bước 0.1%
Hệ số EC/TDS: Điều chỉnh từ 0.45 đến 1.00 với bước 0.01 (mặc định 0.50)
Điện cực: HI76306 đầu dò EC/TDS tích hợp cảm biến nhiệt độ, kết nối DIN và cáp 1m (3.3 ') (bao gồm)
Pin: (3) 1.5V AAA / khoảng 500 giờ sử dụng liên tục. tự động tắt sau 8 phút không sử dụng
môi trường: 0 to 50°C (32 to 122°F); RH max 100%
Kích thước: 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”)
Khối lượng: 205 g (7.2 oz.)
Bảo hành: 12 tháng cho máy và 06 tháng cho điện cực đi kèm
Cung cấp gồm: HI99301 được cung cấp kèm đầu dò EC/TDS HI76306, pin, hướng dẫn sử dụng và hộp đựng

TÍNH NĂNG NỔI BẬT

Đầu dò 2 vòng - HI76306 là một đầu dò hai vòng được cung cấp kèm với máy HI99300, cho phép đo độ dẫn và TDS thang thấp chính xác. Đầu dò cũng tích hợp 1 cảm biến nhiệt độ cho phép bù nhiệt độ tự động

Hai chế độ đo - HI99301 cung cấp hai chế độ đo: EC và TDS. Người dùng có thể dễ dàng chuyển đổi giữa các chế độ đo chỉ cần nhấn nút MODE. Đo EC từ 0.00 đến 20.00 mS/cm và TDS từ 0.00 đến 10.00 ppt

Hệ số TDS tùy chỉnh - Giá trị TDS trong dung dịch nước tỷ lệ thuận với độ dẫn điện. Tỷ lệ giữa hai thông số này phụ thuộc vào dung dịch được đo. HI99301 có một hệ số điều chỉnh TDS 0.45-1.00 với khoảng thời gian 0.01, cho phép lựa chọn hệ số chuyển đổi thích hợp cho các dung dịch cụ thể.

Tự động bù nhiệt - Vì nhiệt độ có ảnh hưởng lớn đến giá trị độ dẫn và TDS, máy cung cấp chế độ bù nhiệt. Đầu dò của HI99300 tích hợp cảm biến nhiệt độ tự động để tự động bù nhiệt độ trong khoảng từ 0 đến 60 ° C (32 đến 140 ° F).

Hệ số bù nhiệt tùy chỉnh - Hệ số bù nhiệt độ, còn được gọi là β, có thể điều chỉnh từ 0.0 - 2.4%/°C với khoảng thời gian 0.1%

Hiệu chuẩn tự động - HI99301 có thể được tự động hiệu chuẩn tại một điểm với dung dịch chuẩn EC hoặc TDS. Dung dịch chuẩn 12.88 mS/cm được sử dụng để hiệu chuẩn EC, máy sẽ tự động hiệu chuẩn TDS. Tuy nhiên, nếu máy đang ở chế độ đo TDS và cài đặt hệ số chuyển đổi là 0.5, máy nên hiệu chuẩn trực tiếp bằng dung dịch chuẩn TDS tại 6.64 ppt.

Hệ thống ngăn ngừa lỗi pin (BEPS) – Thông báo khi pin trở nên quá yếu không đảm bảo phép đo đáng tin cậy.

Biểu tượng ổn định - HI99301 hiển thị một đồng hồ sẽ biến mất khi giá trị đạt được sự ổn định.

Details

 

The portable, waterproof HI99301 EC/TDS and temperature meter is suitable for use in applications as diverse as wastewater treatment, reverse osmosis, and HVAC. It measures high range conductivity in mS/cm and TDS in ppt. The HI76306 EC/TDS probe is a two-ring sensor that resists clogging and is easy to clean. The probe also features a built-in temperature sensor to allow for Automatic Temperature Compensation from 0 to 60°C (32 to 140°F).

The meter easily fits in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in the way. The large, multi-level LCD displays the primary reading, temperature, and calibration guides simultaneously. Symbols and messages on the LCD indicate meter status and guides users through operations.  

 

Features at-a-glance

Two-ring Probe - The HI76306 is a two-ring probe that comes with the HI99301, offering an accurate solution for high range EC and TDS readings. The probe features a built-in temperature probe to allow for temperature compensated readings.

Two Measurement Modes - HI99301 offers two measurement modes: EC and TDS. Users can easily switch between measurement modes with a simple press of the MODE button. EC measurements range from 0.00 to 20.00 mS/cm; TDS measurements range from 0.00 to 10.00 ppt.

Adjustable TDS Factor - The TDS value in aqueous solutions is directly proportional to conductivity. The ratio between the two parameters depends on the solution being measured. The HI99301 has an adjustable TDS factor from 0.45 to 1.00 with 0.01 intervals, allowing users to choose the conversion factor that is the most appropriate for their particular solution.

Automatic Temperature Compensation - Since temperature has such a dramatic effect on conductivity and TDS readings, having a meter that offers temperature compensated readings is invaluable. The probe of the HI99301 features a built-in temperature sensor that automatically accounts for the effects of temperature in the range of 0 to 60°C (32 to 140°F).

Adjustable Temperature Compensation Coefficient - The temperature compensation coefficient, also known as β, is adjustable from 0.0 to 2.4%/°C with 0.1% intervals; this factor corrects the reading a set percentage % for each degree Celsius change in the sample.

Automatic Calibration -  The HI99301 can be automatically calibrated at one point in a standard EC or TDS solution. A 12.88 mS/cm standard is used for EC calibration, which will automatically calibrate TDS readings. However, if the meter is in TDS mode and set to 0.5 conversion factor, a direct calibration in 6.44 ppt TDS calibration solution can be used.

Battery Error Prevention System (BEPS) - The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.

Instability Indicator - The HI99301 displays a clock tag that will disappear when a reading has achieved stability.

Specifications

EC Range 0.00 to 20.00 mS/cm
EC Resolution 0.01 mS/cm
EC Accuracy ±2% FS
TDS Range 0.00 to 10.00 ppt (g/L)
TDS Resolution 0.01 ppt (g/L)
TDS Accuracy ±2% F.S.
Temperature Range 0.0 to 60.0°C / 32.0 to 140.0°F
Temperature Resolution 0.1°C / 0.1°F
Temperature Accuracy (@25ºC/77ºF) ±0.5°C /±1°F
EC/TDS Temperature Compensation automatic, 0 to 60°C (32 to 140°F) with β adjustable from 0.0 to 2.4%/°C with 0.1% step
Calibration automatic, one point at 12.88 mS/cm, 6.44 ppt (CONV 0.5)
EC/TDS Factor adjustable from 0.45 to 1.00 with 0.01 step (default 0.50)
Electrode/Probe HI763063 EC/TDS/temperature sensor, DIN connector and 1 m (3.3’) cable
Battery Type/Life 1.5V AAA (3) / approximately 500 hours of continuous use. auto-off after 8 minutes of non-use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)
Weight 196 g (6.91 oz.)
Ordering Information Each meter is supplied complete with: • HI763063 pH/EC/TDS probe with built‑in temperature sensor, DIN connector and 1m (3.3’) cable • HI70030 12880 μS/cm and HI70038 6.44 ppt 1 sachet each for HI99301 • 100 mL beaker (1 pcs.) • Alkaline batteries: 1.5V AAA (3 pcs.) • Rugged carrying case • Calibration certificate of meter • Calibration certificate of probe • Instruction manual
Warranty 2 years (probe 6 months)

Hướng Dẫn Sử Dụng nhấn tải về HI99301

Bảo đảm chất lượng

Bảo đảm chất lượng

Sản phẩm bảo đảm chất lượng.
Hotline 24/7

Hotline 24/7

Hotline: 085 996 3888
Sản phẩm chính hãng

Sản phẩm chính hãng

Sản phẩm nhập khẩu chính hãng

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

DANH MỤC
DANH MỤC SẢN PHẨM