Model: 3169-20
Hãng sản xuất: Hioki
Xuất xứ: Japan
Bảo hành: 12 tháng
Thông số kỹ thuật:
- Kiểu đo lường: 1-phase 2-dây, 1-phase 3-dây, 3-phase 3-dây, 3phase 4-dây, 4 kênh đo điện áp, 4 kênh đo dòng điện
- Các nhóm đo lường: Điện áp, dòng điện, công suất hữu công/vô công/biểu kiến, Công suất hữu công/ kWh, Hệ số công suất, tần số, dạng sóng hài.
- Thang đo:
+ Điện áp: 150~600V, 3 thang đo
+ Dòng điện: 500mA ~ 5kA AC
+ Công suất: 75W~900kW
- Độ chính xác:
+ Điện áp AC: ±0.2 % rdg. ±0.1 % f.s.
+ Dòng điện AC: ±0.2 % rdg. ±0.1 % f.s
+ Công suất: ±0.2 % rdg. ±0.1 % f.s
- Khoảng thời gian lưu dữ liệu: 1~30s, 1~60min, 13 lựa chọn
- Chức năng khác: Kiểm tra lỗi kết nối, lựa chọn ngôn ngữ, hiển thị giữ số liệu, Thiết lập sao lưu, tắt nguồn tiết kiệm điện, khóa phím
- Giao tiếp thiết bị bên ngoài: RS-232C
- Nguồn: 100 to 240 V AC, 50/60 Hz, 30 VA max
- Kích thức sản phẩm: 210*160*60mm
- Khối lượng sản phẩm: 1.2 kg
-Phụ kiện đi kèm: Dây đo điện áp L9438-53 ×1 (Black/ Red/ Yellow/ Blue), Dây nguồn ×1, hướng dẫn sử dụng, CD-R ×1 (RS-232C interface operating manual) ×1, Nhãn đánh đấu dây ×1.
CLAMP ON POWER HiTESTER 3169
Demand Measurement up to 4 Circuits and Simultaneous Harmonics Analysis
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| Measurement line & number of circuits | Single-phase 2-wires (4 circuits), Single-phase 3-wires (2 circuits), Three-phases 3-wires (2 or 1 circuit), and Three-phases 4-wires (1 circuit) Note: 50 or 60 Hz, and that share the same voltage line |
|---|---|
| Measurement items | Voltage, Current, Active/ reactive/ apparent power, Active/ reactive power integration, Power factor, Frequency, Harmonic waveform value (up to 40th order) |
| Measurement range | [Voltage] 150.00 V to 600.00 V AC, 3 ranges, [Current] 500.00 mA to 5.0000 kA AC (depends on current sensor in use), [Power] 75.000 W to 900.00 kW (depends on combination of voltage, current range, and measurement line) |
| Basic accuracy | AC Voltage: ±0.2 % rdg. ±0.1 % f.s. AC Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy (at power factor = 1) Clamp on sensor 9661: ±0.3 % rdg. ±0.01 % f.s. (different from each sensor models) |
| Measurement method | Digital sampling, PLL synchronization or 50/60 Hz fixed clock |
| Display refresh rate | 2 times /sec (except when a PC card accessing, or RS-232C communications) |
| Data save interval | Standard interval: 1 sec to 30 sec, 1 minute to 60 minutes, 13 selects Fast interval: A single waveform, or 0.1, 0.2, or 0.5 sec (at instant value only) |
| Frequency characteristics | Fundamental waveforms up to the 50th order ±3% f.s. + measurement accuracy (of a 45 to 66 Hz fundamental waveform) |
| Other functions | Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, (±5 V DC f.s.) |
| Power supply | 100 to 240 V AC, 50/60 Hz, 30 VA max. |
| Dimensions and mass | 210 mm (8.27 in)W × 160 mm (6.30 in)H × 60 mm (2.36 in)D, 1.2 kg (42.3 oz) |
| Accessories | Voltage cord L9438-53 ×1 (Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4), Power cord ×1, Instruction manual ×1, Quick start manual ×1, CD-R ×1 (RS-232C interface operating manual) ×1, Input cord label ×1, Connection cable 9441 ×1 (for the 3169-21 only) |
Current measurement
For power or load current measurement
(1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3 phase measurements)
CLAMP ON SENSOR 9669
• 40Hz to 5kHz • 1000 A AC rated input • φ 55 mm (2.17 in) Core dia.
CLAMP ON SENSOR 9694
• 40Hz to 5kHz • 5A AC rated input • φ 15 mm (0.59 in) core dia.
CLAMP ON SENSOR 9695-02
• 40Hz to 5kHz • 50 A AC rated input • φ 15 mm (0.59 in) core dia.
CLAMP ON SENSOR 9695-03
• 40Hz to 5kHz • 100 A AC rated input • φ 15 mm (0.59 in) core dia.
AC FLEXIBLE CURRENT SENSOR CT9667
• 10 Hz to 20 kHz (±3dB) • 5000 A/ 500 A AC rated input
CONNECTION CABLE 9219
Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length
CLAMP ON SENSOR 9660
• 40Hz to 5kHz • 100 A AC rated input • φ 15 mm (0.59 in) core dia.
CLAMP ON SENSOR 9661
• 40Hz to 5kHz • 500 A AC rated input • φ 46 mm (1.81 in) core dia.
Adapter
For clamp sensor
CLAMP ON ADAPTER 9290-10
• Primary 1000A, secondary 100A (1/10 ratio) output • Superior phase angle characteristics for power
Voltage measurement
*The L9438-53 is bundled
MAGNETIC ADAPTER 9804-01
Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)
MAGNETIC ADAPTER 9804-02
Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)
VOLTAGE CORD L9438-53
Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4
PATCH CORD L1021-01
Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
PATCH CORD L1021-02
Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V
PC software
POWER LOGGER VIEWER SF1001
• Easy graphical processing of measurement data saved with the PW3360/3365 series, 3169 series on a PC
Storage media
* PC CARD 2G 9830, PC CARD 1G 9729 : cannot use with the 3169-20, 3169-21 * Supplied with PC Card adapter
PC Card Precaution
Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.
PC CARD 512M 9728
• 512 MB capacity • PC card adapter bundled
Printer options
RECORDING PAPER 1196
For the Printer 9442, 112 mm (4.41 in) × 25 m (82.03 ft), 10 rolls/set
PRINTER 9442
For printing numerical values 112 mm (4.41 in) paper width, not CE marked
AC ADAPTER 9443-02
For the Printer 9442, EU type
RS-232C CABLE 9721
Mini DIN 9pin to D-sub 9pin, straight, 1.5 m (4.92 ft) length
Other options
*The 9441 is bundled with the 3169-21
CONNECTION CABLE 9440
For external control, 2 m (6.56 ft) length
CONNECTION CABLE 9441
For D/A output, 2 m (6.56 ft) length
RS-232C CABLE 9612
For the PC, Mini DIN 9pin to D-sub 9pin, cross, 1.5 m (4.92ft) length
CARRYING CASE 9720-01
Soft type, Includes compartment for options, for the 3169 series
Bảo đảm chất lượng
Sản phẩm bảo đảm chất lượng.
Hotline 24/7
Hotline: 085 996 3888
Sản phẩm chính hãng
Sản phẩm nhập khẩu chính hãng
