Máy quang đo đa chỉ tiêu trong lò hơi và tháp làm mát HI83305-02

Model: HI83305
Hãng sản xuất: Hanna
Xuất xứ: Rumani.
Bảo hành: 12 tháng
17.350.209₫
* Giá sản phẩm chưa bao gồm VAT
Tình trạng: Còn hàng
Điện thoại: 0976595968

Model: HI83305-02 
Hãng sản xuất: HANNA
Xuất xứ: RUMANI
Bảo hành: 12 tháng
Tính năng:
- Màn hình đồ họa LCD 128 x 64 Pixel có đèn nền
- Hẹn thời gian phản ứng khi đo: Màn hình sẽ giữ kết quả đo khi đồng hồ đếm ngược kết thúc tạo sự nhất quán trong mỗi lần đo.
- Chế độ hấp thụ: Sử dụng cuvet chuẩn CAL Check của Hanna để xác nhận nguồn sáng.
- Đơn vị đo hiển thị cùng kết quả
- Đầu nối điện cực pH/nhiệt độ kĩ thuật số
- Lưu dữ liệu - Người dùng có thể lưu lên đến 1000 giá trị bằng nút LOG chuyên dụng. Giá trị được ghi dễ dàng xem lại bằng nút RCL.
- Kết nối – Giá trị được lưu có thể nhanh chóng và dễ dàng chuyển giao với 1 ổ đĩa flash hoặc một máy tính thông qua cổng USB. Dữ liệu được xuất theo một tập tin .CSV để sử dụng với các chương trình bảng tính phổ biến
- Chuyển đổi kết quả - Ngăn ngừa sự nhầm lẫn khi chuyển đổi tự động kết quả với các hình thức hóa học khác nhau. Chuyển đổi chung tất cả chỉ với 1 nút nhấn.
- Hướng dẫn trên màn hình - Các hướng dẫn ngắn liên quan đến các hoạt động hiện tại được hiển thị. Ở bất kỳ giai đoạn trong quá trình cài đặt hoặc đo lường, nút HELP chuyên dụng có sẵn để hiển thị trợ giúp theo ngữ cảnh.
- Hiển thị tình trạng pin  - Chỉ ra số lượng pin còn lại.
- Tin nhắn lỗi - Tin nhắn trên màn hình cảnh báo đến các vấn đề như không có nắp, zero cao, và chuẩn quá thấp. Thông điệp hiệu chuẩn pH bao gồm vệ sinh điện cực, kiểm tra đệm và đầu dò
- Khoang chứa cuvet - Ngăn chặn ánh sáng đi lạc ảnh hưởng đến phép đo.
Thông số chung:
- Điện cực pH: Điện cực pH kĩ thuật số (mua riêng)
- Kiểu ghi: Ghi theo yêu cầu với tên người dùng và ID mẫu
- Bộ nhớ ghi: 1000 mẫu
- Kết Nối: USB-A host for flash drive; micro-USB-B for power and computer connectivity
- GLP: Dữ liệu hiệu chuẩn cho điện cực pH
- Màn hình: LCD có đèn nền 128 x 64
- Pin: Pin sạc 3.7VDC
- Nguồn điện: 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
- Môi trường: 0 to 50°C (32 to 122°F); max 95% RH không ngưng tụ
- Kích thước: 206 x 177 x 97 mm (8.1 x 7.0 x 3.8")
- Khối lượng: 1.0 kg (2.2 lbs.)
- Nguồn sáng: 4 đèn LED với nhiều bộ lọc nhiễu băng hẹp 20 nm, 525 nm, 575 nm, and 610 nm
- Đầu dò ánh sáng: Silicon photodetector
- Bandpass Filter Bandwidth: 8 nm
- Bandpass Filter Wavelength Accuracy: ±1 nm
- Cuvet: Tròn 24.6mm
- Số phương pháp: Tối đa 128
Cung cấp gồm: HI83305 cung cấp kèm 4 cuvet có nắp, khăn lau cuvet, cáp USB, adapter và hướng dẫn
Thuốc thử mua riêng theo chỉ tiêu cần đo.


 


 


 

Boiler and Cooling Tower Photometer - HI83305

HI83305 is a compact, multiparameter photometer intended for boiling and cooling tower applications for use in the lab or in the field. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. This meter has 30 different programmed methods measuring 18 key water quality parameters and also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves. Parameters specific to boiling and cooling towers include oxygen scavengers and silica which are important for maintaining equipment.

To save valuable laboratory benchtop space, the HI83305 doubles as a professional pH meter with its digital pH/temperature electrode input. Now one meter can be used for both photometric and pH measurements.

Advanced optical system

Unparalleled performance from a benchtop photometer

Digital pH electrode input

Save valuable bench space with one meter that works both as a photometer and as a laboratory pH meter

Absorbance measuring mode

pH Range Photometer: 6.5 to 8.5 pH
pH electrode: -2.00 to 16.00 pH
pH Resolution Photometer: 0.1 pH
pH electrode: 0.01 pH
pH Accuracy Photometer: ±0.1 pH
pH electrode: ±0.01 pH
pH Calibration Automatic one or two point calibration with one set of standard buffers available (4.01, 6.86, 7.01, 9.18, 10.01)
pH Temperature Compensation Automatic (-5.0 to 100.0 oC; 23.0 to 212.0 oF); limits reduced based on the pH electrode used
pH CAL Check (electrode diagnostics) clean electrode and check buffer/check probe displayed during calibration
pH Method Photometer: phenol red
pH-mV Range ±1000 mV
pH-mV Resolution 0.1 mV
pH-mV Accuracy ±0.2 mV
Oxygen, Dissolved Range 0.0 to 10.0 mg/L (as O2)
Oxygen, Dissolved Resolution 0.1 mg/L
Oxygen, Dissolved Accuracy ±0.4 mg/L ±3% of reading
Oxygen, Dissolved Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Azide modified Winkler method
Absorbance Range 0.000 to 4.000 Abs
Absorbance Resolution 0.001 Abs
Absorbance Accuracy +/-0.003Abs @ 1.000 Abs
Aluminum Range 0.00 to 1.00 mg/L (as Al3+)
Aluminum Resolution 0.01 mg/L
Aluminum Accuracy ±0.04 mg/L ±4% of reading
Aluminum Method Adaptation of the aluminon method
Ammonia Range Low Range: 0.00 to 3.00 mg/L
Medium Range: 0.00 to 10.00 mg/L
High Range: 0.0 to 100.0 mg/L (all as NH3-N)
Ammonia Resolution 0.01 mg/L; 0.1 mg/L
Ammonia Accuracy Low Range: ±0.04 mg/L ±4% of reading
Medium Range: ±0.05 mg/L ±5% of reading
High range: ±0.5 mg/L ±5% of reading
Ammonia Method Adaptation of the ASTM Manual of Water and Environmental Technology, D1426-92, Nessler method
Bromine Range 0.00 to 8.00 mg/L (as Br2)
Bromine Resolution 0.01 mg/L
Bromine Accuracy ±0.08 mg/L ±3% of reading
Bromine Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, DPD method.
Chlorine Dioxide Range 0.00 to 2.00 mg/L (as ClO2)
Chlorine Dioxide Resolution 0.01 mg/L
Chlorine Dioxide Accuracy ±0.10 mg/L ±5% of reading
Chlorine Dioxide Method Adaptation of the Chlorophenol Red method.
Free Chlorine Range 0.00 to 5.00 mg/L (as Cl2)
Free Chlorine Resolution 0.01 mg/L
Free Chlorine Accuracy ±0.03 mg/L ±3% of reading
Total Chlorine Range 0.00 to 5.00 mg/L (as Cl2)
Total Chlorine Resolution 0.01 mg/L
Total Chlorine Accuracy ±0.03 mg/L ±3% of reading
Chlorine Method Adaptation of the EPA 330.5 DPD method
Chromium, Hexavalent Range Low Range: 0 to 300 μg/L (as Cr6+)
High Range: 0 to 1000 μg/L (as Cr6+)
Chromium, Hexavalent Resolution 1 μg/L
Chromium, Hexavalent Accuracy Low Range: ±1 μg/L ±4% of reading
High Range: ±5 μg/L ±4% of reading
Chromium, Hexavalent Method Adaptation of the ASTM Manual of Water and Environmental Technology, D1687-92, Diphenylcarbohydrazide method.
Copper Range Low Range: 0.000 to 1.500 mg/L (as Cu2+)
High range: 0.00 to 5.00 mg/L (as Cu2+)
Copper Resolution 0.001 mg/L; 0.01 mg/L
Copper Accuracy Low Range: ±0.01 mg/L ±5% of reading
High Range ±0.02 mg/L ±4% of reading
Copper Method Adaptation of the EPA bicinchoninate method
Hydrazine Range 0 to 400 μg/L (as N2H4)
Hydrazine Resolution 1 μg/L
Hydrazine Accuracy ±4% of full scale reading
Hydrazine Method Adaptation of the ASTM Manual of Water and Environmental Technology, method D1385-88, p-Dimethylaminobenzaldehyde method
Iron Range Low Range: 0.000 to 1.600 mg/L (as Fe)
High Range: 0.00 to 5.00 mg/L (as Fe)
Iron Resolution 0.001 mg/L; 0.01 mg/L
Iron Accuracy Low Range: ±0.01 mg/L ±8% of reading
High Range: ±0.04 mg/L ±2% of reading
Iron Method Low Range: Adaptation of the TPTZ Method
High Range: Adaptation of Standard Methods for the Examination of Water and Wastewater, 3500-Fe B., Phenanthroline Method
Molybdenum Range 0.0 to 40.0 mg/L (as Mo6+)
Molybdenum Resolution 0.1 mg/L
Molybdenum Accuracy ±0.3 mg/L ±5% of reading
Molybdenum Method Adaptation of the mercaptoacetic acid method
Nitrate Range 0.0 to 30.0 mg/L (as NO3-- N)
Nitrate Resolution 0.1 mg/L
Nitrate Accuracy ±0.5 mg/L ±10% of reading
Nitrate Method Adaptation of the cadmium reduction method
Nitrite Range Freshwater
Low Range: 0 to 600 μg/L (as NO2--N)
High Range: 0 to 150 mg/L (as NO2-)
Nitrite Resolution Freshwater: 1 μg/L; 1 mg/L
Nitrite Accuracy Freshwater
Low Range: ±20 μg/L ±4% of reading
High Range: ±4 mg/L ±4% of reading
Nitrite Method Low Range: Adaptation of the EPA Diazotization method 354.1
High Range: Adaptation of the Ferrous Sulfate method
Oxygen, Scavenger Range 0 to 1000 μg/L (as DEHA)
0.00 to 1.50 mg/L (as Carbohydrazide)
0.00 to 2.50 mg/L (as Hydroquinone)
0.00 to 4.50 mg/L (as ISO-ascorbic acid)
Oxygen, Scavenger Resolution 1 μg/L (DEHA); 0.01 mg/L
Oxygen, Scavenger Accuracy ±5 μg/L ±5% of reading
Oxygen, Scavenger Method Adaptation of the iron reduction method
Phosphate Range Freshwater
Low Range: 0.00 to 2.50 mg/L (as PO43-)
High range: 0.0 to 30.0 mg/L(as PO43-)
Phosphate Resolution Freshwater: 0.01 mg/L; 0.1 mg/L
Phosphate Accuracy Freshwater
Low Range: ±0.04 mg/L ±4% of reading
High Range: ±1 mg/L ±4% of reading
Phosphate Method Freshwater Low Range: Adaptation of the Ascorbic Acid method
Freshwater High Range: Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Amino Acid method
Silica Range Low Range: 0.00 to 2.00 mg/L (as SiO2)
High Range: 0 to 200 mg/L (as SiO2)
Silica Resolution 0.01 mg/L; 1 mg/L
Silica Accuracy Low Range: ±0.03 mg/L ±3% of reading
High Range: ±1 mg/L ±5% of reading
Silica Method Low Range: Adaptation of the ASTM Manual of Water and Environmental Technology, D859, Heteropoly Molybdenum Blue method
High Range: Adaptation of the USEPA Method 370.1 and Standard Method 4500-SiO2
Zinc Range 0.00 to 3.00 mg/L (as Zn)
Zinc Resolution 0.01 mg/L
Zinc Accuracy ±0.03 mg/L ±3% of reading
Zinc Method Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Zincon method
Input Channels 1 pH electrode input and 5 photometer wavelengths
pH Electrode digital pH electrode (not included)
Photometer/Colorimeter Light Source 5 LEDs with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filters
Photometer/Colorimeter Light Detector silicon photodetector
Bandpass Filter Bandwidth 8 nm
Bandpass Filter Wavelength Accuracy ±1 nm
Cuvette Type round, 24.6 mm
Number of Methods 128 max.
GLP calibration data for connected pH electrode
Display 128 x 64 pixel LCD with backlight
Logging Type log on demand with user name and sample ID optional input
Logging Memory 1000 readings
Connectivity USB-A host for flash drive; micro-USB-B for power and computer connectivity
Power Supply 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
Battery Type/Life 3.7 VDC Li-polymer rechargeable battery / >500 photometric measurements or 50 hours of continuous pH measurement
Environment 0 to 50.0 oC (32 to 122.0 oF); 0 to 95% RH, non-condensing
Weight 1.0 kg (2.2 lbs.)
Dimensions 206 x 177 x 97 mm (8.1 x 7.0 x 3.8")
Ordering Information HI83305 is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes, USB to micro USB cable connector, power adapter and instruction manual.

 

 

  •  

 

Bảo đảm chất lượng

Bảo đảm chất lượng

Sản phẩm bảo đảm chất lượng.
Hotline 24/7

Hotline 24/7

Hotline: 085 996 3888
Sản phẩm chính hãng

Sản phẩm chính hãng

Sản phẩm nhập khẩu chính hãng

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

DANH MỤC
DANH MỤC SẢN PHẨM