Đồng hồ vạn năng Fluke 17B Max
Model: 17B Max
Hãng sản xuất: Fluke
Xuất xứ: China
Bảo hành: 12 tháng
Thông số kỹ thuật:
AC volts: (4.000 V, 40.00 V, 400.0 V, 1000 V)/(1.0 % + 3)
DC volts: (4.000 V, 40.00 V, 400.0 V, 1000 V)/(0.5 % + 3)
AC mV: 400.0 mV/3.0 % + 3
DC mV: 400.0 mV/1.0 % + 10
Kiểm tra đi-ốt: 2.000 V/10%
Ohms: 400.0 Ω/ 0.5 % + 3; (4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ)/0.5 % + 2; 40.00 MΩ/1.5% + 3
Kiểm tra tụ điện: (40.00 nF, 400.0 nF)/2 % + 5; (4.000 μF, 40.00 μF, 400.0 μF, 1000 μF)/5 % + 5
Tần số: (50.00 Hz, 500.0 Hz, 5.000 kHz, 50.00 kHz, 100.0 kHz)/0.1 % + 3
Dòng AC (μA): (400.0 μA, 4000 μA)/1.5 % + 3
Dòng AC (mA): (40.00 mA, 400.0 mA)/1.5 % + 3
Dòng AC (A): (4.000 A, 10.00 A)/1.5 % + 3
Dòng DC ( μA): (400.0 μA, 4000 μA)/1.5 % + 3
Dòng DC (mA): (40.00 mA, 400.0 mA)/1.5 % + 3
Dòng DC (A): (4.000 A, 10.00 A)/1.5 % + 3
Đo nhiệt độ: 50 °C- 400 °C/2 % ± 1 °C, 0 °C- 50 °C/± 2 °C,-55 °C- 0 °C/ 9 % ± 2 °C
Bảo vệ quá tải
+ AC volts: 1000 V
+ AC mV: 400 mV
+ DC volts: 1000 V
+ DC mV: 400 mV
Đồng hồ vạn năng Fluke 17B Max Cấp bảo vệ IP: IP 40
Màn hình hiển thị LCD
Đồng hồ vạn năng Fluke 17B Max Pin: 2 AA, thời lượng pin nhỏ nhất 500 giờ
Đồng hồ vạn năng Fluke 17B Max Kích thước: 183 x 91 x 49.5 mm
Đồng hồ vạn năng Fluke 17B Max Trọng lượng: 455 g
Đồng hồ vạn năng Fluke 17B Max
Accuracy Specifications
Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0% to 75%. Accuracy specifications take the form of: ±(% of Reading + Number of Least Significant Digits).
| Function | Range | Resolution | Accuracy | |
| AC volts (40 Hz to 500Hz)1 | 4.000 V 40.00 V 400.0 V 1000 V | 0.001 V 0.01 V 0.1 V 1 V | 1.0% + 3 | |
| DC volts | 4.000 V 40.00 V 400.0 V 1000 V | 0.001 V 0.01 V 0.1 V 1 V | 0.5% + 3 | |
| AC millivolts | 400.0 mV | 0.1 mV | 3.0% + 3 | |
| DC millivolts | 400.0 mV | 0.1 mV | 1.0% + 10 | |
| Diode test2 | 2.000 V | 0.001 V | 10% | |
| Resistance (Ohms) | 400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ | 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ | 0.5% + 3 0.5% + 2 0.5% + 2 0.5% + 2 0.5% + 2 1.5% + 3 | |
| Capacitance3 | 40.00 nF 400.0 nF 4.000 μF 40.00 μF 400.0 μF 1000 μF | 0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF | 2% + 5 2% + 5 5% + 5 5% + 5 5% + 5 5% + 5 | |
| Frequency1 Hz (10 Hz – 100 kHz) | 50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz | 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz | 0.1% + 3 | |
| Duty Cycle1 | 1% to 99% | 0.1% | 1% typical 4 | |
| AC current μA (40 Hz to 400 Hz) | 400.0 μA 4000 μA | 0.1 μA 1 μA | 1.5% + 3 | |
| AC current mA (40 Hz to 400 Hz) | 40.00 mA 400.0 mA | 0.01 mA 0.1 mA | 1.5% + 3 | |
| AC current A (40 Hz to 400 Hz) | 4.000 A 10.00 A | 0.001 A 0.01 A | 1.5% + 3 | |
| DC current μA | 400.0 μA 4000 μA | 0.1 μA 1 μA | 1.5% + 3 | |
| DC current mA | 40.00 mA 400.0 mA | 0.01 mA 0.1 mA | 1.5% + 3 | |
| DC current A | 4.000 A 10.00 A | 0.001 A 0.01 A | 1.5% + 3 | |
| Temperature | 50 °C- 400 °C 0 °C- 50 °C -55 °C- 0 °C | 0.1C | 2% ±1 °C ±2 °C 9% ±2 °C | |
| Backlight | - | - | Yes | |
| 1All ac, Hz, and duty cycle are specified from 1% to 100% of range. Inputs below 1% of range are not specified. 2Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA. 3Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 40 nF range). 4Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10% and 90%. | ||||
| Function | Overload protection | Input impedance (Nominal) | Common mode rejection ratio | Normal mode rejection ratio |
| AC volts | 1000 V 1 | >10 MΩ <100 pF | >60 dB at dc, 50 Hz or 60 Hz | - |
| AC millivolts | 400 mV | >1MΩ, <100 pF | >80 dB at 50 Hz or 60 Hz | - |
| DC volts | 1000 V 1 | >10 MΩ <100 pF | >100 dB at dc, 50 Hz or 60 Hz | >60 dB at 50 Hz or 60 Hz |
| DC millivolts | 400 mV | >1MΩ, <100 pF | >80 dB at 50 Hz or 60 Hz | - |
| 1 106 V Hz Max | ||||
| General specifications | |
| Maximum voltage between any terminal and earth ground | 1000 V |
| Display (LCD) | 4000 counts, updates 3/sec |
| Battery type | 2 AA, NEDA 15A, IEC LR6 |
| Battery life | 500 hours minimum (50 hours in LED Test mode without load. The hours with load depends on the type of LED under test.) |
| Temperature | |
| Operating | 0 °C to 40 °C |
| Storage | -30 °C to 60 °C |
| Relative humidity | |
| Operating humidity | Non-condensing (<10°C) ≤90% RH at 10 °C to 30 °C ≤75% RH at 30 °C to 40 °C |
| 40 MΩ range ≤80% RH at 10 °C to 30 °C ≤70% RH at 30 °C to 40 °C | |
| Altitude | |
| Operating | 2000 m |
| Storage | 12,000 m |
| Temperature coefficient | 0.1 X (specified accuracy) /°C (<18 °C or >28 °C) |
| Fuse protection for current inputs | 440 mA, 1000 V Fast Fuse, Fluke specified part only. 11A, 1000V Fast Fuse, Fluke specified part only. |
| Size (H x W x L) | 183 x 91 x 49.5 mm |
| Weight | 455 g |
| IP rating | IP 40 |
| Safety | IEC 61010-1, IEC61010-2-030 CAT III 600 V, CAT II 1000 V, Pollution Degree 2 |
| Electromagnetic environment | IEC 61326-1: Portable |
| Electromagnetic compatibility | Applies to use in Korea only |
| Class A equipment (industrial broadcasting and communication equipment)1 1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. | |
Bảo đảm chất lượng
Sản phẩm bảo đảm chất lượng.
Hotline 24/7
Hotline: 085 996 3888
Sản phẩm chính hãng
Sản phẩm nhập khẩu chính hãng
