Máy đo công suất HIOKI PW3360-21 (đo sóng hài, chưa gồm kìm đo)

Model: PW3360-21
Hãng sản xuất: HIOKI
Xuất xứ: Japan
Bảo hành: 12 tháng
Liên hệ
Tình trạng: Còn hàng
Điện thoại: 0976595968

Model: PW3360-21
Hãng sản xuất: Hioki
Xuất xứ: Japan
Bảo hành: 12 tháng
Thông số kỹ thuật:
- Kiểu đo: 1 pha 2 dây, 1 pha 3 dây, 3 pha 3 dây, 3 pha 4 dây. 3 kênh đo dòng, 50/60 Hz
- Các thông số đo:
+ Điện áp/dòng điện hiệu dụng (RMS)Voltage/current RMS.
+ Giá trị sóng dòng điện điện áp.
+ Góc pha sóng dòng điện/ điện áp voltage /current fundamental wave phase angle,
+ Tần số frequency,
+ Đỉnh dạng sóng dòng điện/ điện áp (giá trị tuyệt đối) voltage/current waveform peak (absolute value).
+ Công suất hữu công, công suất vô công, biểu kiến, công suất tiêu thụ.
+ Hệ số công suất.
+ Đánh giá nhu cầu năng lượng ,. . .
+ Xung đầu vào
- Chức năng kiểm tra Sóng hài
- Dải đo điện áp: 600 V AC
- Dải đo dòng điện: Phụ thuộc kìm đo (chọn mua thêm kìm đo dòng)
+ 500.00 mA tới 5.0000 kA AC (tùy thuộc vào loại kẹp dòng).
+ 50.000 mA tới 5.0000 A AC (chỉ với kẹp dòng dò).
- Dải đo công suất: 300.00 W tới 9.0000 MW.
- Sai số cơ bản.
+ Điện áp AC: ±0.3% rdg. ±0.1% f.s
+ Dòng điện AC: ±0.3% rdg. ±0.1% f.s. + sai số của kẹp dòng.
+ Công suất hữu công: ±0.3% rdg. ±0.1% f.s. + sai số của kẹp dòng (với hệ số công suất = 1).
- Sai số của kẹp dòng: ±0.3% rdg. ±0.01% f.s.
- Bộ nhớ: Thẻ nhớ SD, bộ nhớ trong (khoảng 320 KB).
- Chu kỳ ghi: Từ 1 tới 30 giây, từ 1 phút tới 60 phút, 14 lựa chọn.
- Giao diện: LAN, USB.
- Nguồn cấp: AC ADAPTER Z1006: (12 V, 1.25 A), điện áp vào từ 100 VAC tới 240 VAC, 50/60 Hz, BATTERY PACK 9459: (Ni-MH DC7.2 V 2700 mAh)
- Kích thước: 180 mm W × 100 mm H × 48 mm D.
- Trọng lượng: 550g (không bao gồm PW9002).
  Phụ kiện: Dây đo điện áp L9438-53 ×1 set, AC ADAPTER Z1006 ×1, Cáp USB  ×1, sách hướng dẫn ×1, hướng dẫn đo ×1

CLAMP ON POWER LOGGER PW3360

Portable Power Loggers for Energy Audits and Energy Conservation

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement line & number of circuits 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
Measurement items Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input
[PW3360-21 only]: Harmonic voltage level, harmonic current level, harmonic power level, content percentage, phase angle, total harmonic distortion (THD-F or THD-R), up to 40th order
Voltage ranges 600 V AC (Effective measurement range: 90.00 V to 780.00 V)
Current ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
Power ranges 300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type)
Basic accuracy Voltage : ±0.3% rdg. ±0.1% f.s
Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
Display update rate 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Save destination SD memory card, or internal memory at real time
Data save interval 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
Save items Measurement value save: Average only / Average, Max./Min. value, [PW3360-21 only]: Harmonic data save: Average only / average, max./min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), Waveform save: Binary waveform data
Interfaces SD/SDHC memory card
LAN 100BASE-TX: HTTP server function, remote settings via communication program, data download
USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download
Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal
Functions Connection check, Quick Set navigation guide, clock, pulse input
Power supply AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter)
Battery Pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off)
Dimensions and mass 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002
180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002
Accessories Voltage cord L9438-53 ×1 set, AC adapter Z1006 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color clip ×1 set: red, yellow, blue, white/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords ×5
 

Current measurement

For power or load current measurement

(1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)

CLAMP ON SENSOR 9660

• 40Hz to 5kHz • 100 A AC rated input • φ 15 mm (0.59 in) core dia.

Learn more

 

CLAMP ON SENSOR 9661

• 40Hz to 5kHz • 500 A AC rated input • φ 46 mm (1.81 in) core dia.

Learn more

 

CLAMP ON SENSOR 9669

• 40Hz to 5kHz • 1000 A AC rated input • φ 55 mm (2.17 in) Core dia.

Learn more

 

CLAMP ON SENSOR 9694

• 40Hz to 5kHz • 5A AC rated input • φ 15 mm (0.59 in) core dia.

Learn more

CLAMP ON SENSOR 9695-02

• 40Hz to 5kHz • 50 A AC rated input • φ 15 mm (0.59 in) core dia.

Learn more

 

CLAMP ON SENSOR 9695-03

• 40Hz to 5kHz • 100 A AC rated input • φ 15 mm (0.59 in) core dia.

Learn more

 

AC FLEXIBLE CURRENT SENSOR CT9667

• 10 Hz to 20 kHz (±3dB) • 5000 A/ 500 A AC rated input

Learn more

 

CONNECTION CABLE 9219

Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length

Leak current

For leak current measurement (not capable of power measurement)

Caution: Up to 5 A on Model PW3360

CLAMP ON LEAK SENSOR 9657-10

• 40 Hz to 5 kHz • Rated 5 A AC • φ 40 mm (1.57 in) core dia.

Learn more

 

CLAMP ON LEAK SENSOR 9675

• 40 Hz to 5 kHz • Rated 5 A AC • φ 30 mm (1.18 in) core dia.

Learn more

Adapter

For clamp sensor

CLAMP ON ADAPTER 9290-10

• Primary 1000A, secondary 100A (1/10 ratio) output • Superior phase angle characteristics for power

Learn more

Voltage input

*L9438-53 is bundled with the PW3360-20/-21

MAGNETIC ADAPTER 9804-01

Attaches to the tip of cord, red ×1, φ11 mm (0.43 in)

 

MAGNETIC ADAPTER 9804-02

Attaches to the tip of cord, black ×1, φ11 mm (0.43 in)

 

VOLTAGE CORD L9438-53

Black/ Red/ Yellow/ Blue, 3 m (9.84 ft) length, Alligator clip ×4

 

PATCH CORD L1021-01

Banana branch-banana, Red: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

PATCH CORD L1021-02

Banana branch-banana, Black: 1, Cable length: 0.5 m, For branching from the L9438s or L1000s, CAT IV 600 V, CAT III 1000 V

Storage media

SD Card Precaution

Use only SD Cards sold by HIOKI. Compatibility and performance are not guaranteed for SD cards made by other manufacturers. You may be unable to read from or save data to such cards.

SD MEMORY CARD 2GB Z4001

2 GB capacity

 

SD MEMORY CARD Z4003

8 GB capacity

Power supply

*Z1006 is bundled with the PW3360-20/-21.

Model 9459 is a replacement battery pack included with the Battery Set PW9002.

BATTERY PACK 9459

NiMH, Charges while installed in the main unit

 

BATTERY SET PW9002

Battery case and Battery Pack 9459 Set

 

VOLTAGE LINE POWER ADAPTER PW9003

For PW3360, supplies power from measurement lines, up to 240V AC

 

AC ADAPTER Z1006

100 to 240 V AC

Other options

CARRYING CASE C1005

For PW3360/3365 series, for storing options

PC peripherals

POWER LOGGER VIEWER SF1001

• Easy graphical processing of measurement data saved with the PW3360/3365 series, 3169 series on a PC

Learn more

 

GENNECT CROSS SF4000

• Software automatically recognizes LAN-connected measuring instrument • Display acquired data as graphs in real-time • Windows compatible

Learn more

 

LAN CABLE 9642

Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length.

Bảo đảm chất lượng

Bảo đảm chất lượng

Sản phẩm bảo đảm chất lượng.
Hotline 24/7

Hotline 24/7

Hotline: 085 996 3888
Sản phẩm chính hãng

Sản phẩm chính hãng

Sản phẩm nhập khẩu chính hãng

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

DANH MỤC
DANH MỤC SẢN PHẨM