DESCRIPTION
The MEDICAL PROJECT line is ideal for biomedical and scientific research laboratories and for routine activities in research, recovery and diagnostic hospital units, as well as the preservation of medication -either close to hospitalisation units or distribution pharmacies. It is characterised by manufacturing according to ISO 9001:2000 quality standards and in compliance with UNI EN 61010 (CEI66/5) laboratory regulations; it comes with full instrumentation and a variety of technical solutions that make it an absolutely specific and safe line for the products, operators and environment: in other words, it raises the quality of the activities carried out by the users themselves.
STRUCTURE: External cabinet in white pre-enamelled or plasticised steel sheets, internal surface in special non-abrasive thermoformed plastic with rounded edges for maximum hygiene and cleanliness; front support feet; reversible door with key lock, ergonomic handle and magnetic gaskets; insulation with CFC- and HCFC-free polyurethane and refrigerating circuit with HFC and/or other environmentally-friendly refrigerants. The door comes with a micro switch to block, upon opening, the operation of the vent and refrigeration, obtaining the least alteration in the internal T that would be delivered by the exchange of air in the work chamber. Internal lighting is activated when the door is opened in models with blind doors, and by an external switch in models with glass doors.
Models KBSR 180C and KBSR 180V are also ideal for under-the-counter installations.
REFRIGERATION: Refrigeration of the internal chamber through a ventilated evaporator on the internal back surface for best temperature uniformity; automatic defrost and automatic evaporation of the condensation water in KBSR biological refrigerators. Airtight compressors and air condensation, ventilated, for maximum reliability even in critical environmental conditions.
THERMOREGULATION AND CONTROL: Command panel with:
• Main ON/OFF switch
• Mechanical thermostat with LCD (external) display
ACCESSORIES:
• Pivoting wheel kit
• Additional shelf
• Removable (drilled) drawer on sliding rails (available in ABS plastic, aluminium or AISI 304)
• Internal plastic divisions for drawers
• Internal-external through-hole with rubber stopper
On this equipment series it is possible to carry out activities such as I. Q. (Installation Qualification) and O. Q. (Operational Qualification); please contact KW’s Commercial Office for an assessment of the costs entailed by such activities.
