Máy đo Acquy Hioki BT3562
Model: BT3562
Hãng sản xuất: Hioki
Xuất xứ: Japan
Bảo hành: 12 tháng
Thông số kỹ thuật:
- Ứng dụng đo điện áp Max:
+ ± 60 V DC mức điện áp đầu vào
+ ± 70 V DC tối đa mức điện áp so với đất
- Thang đo điện trở:
+ 3mΩ(max.3.1mΩ/độ phân giải 0.1μΩ)~3000 Ω (Max.3100Ω/độ phân giải 100mΩ), 7thang/Độ chính xác: ±0.5 % rdg. ±5 dgt
+ Thang 3mΩ/ độ chính xác:±0.5 % rdg. ±10 dgt
+ Tần số nguồn kiểm tra: 1kHz ±0.2Hz
+ Dòng kiểm tra: 100mA (Thang 3mΩ)~10μA (Thang 3000Ω)
+ Điện áp hở: 25V(thang 3/30 mΩ), 7V(thang 300mΩ), 4V(thang 3Ω~3000Ω)
- Thang đo điện áp: DC 6 V(độ phân giải 10μV)DC~60V(độ phân giải 1mV), 2 thang
- Độ chính xác:±0.01 % rdg. ±3 dgt.
- Hiển thị: LED, 31000 số(đo điện trở), 600000 số (đo điện áp)
- Tỉ lệ lấy mẫu: 4 Bước :4 ms(rất nhanh), 12 ms(nhanh), 35 ms(trung bình), 150 ms(chậm)
- Thời gian lấy mẫu: 10ms
- Chức năng so sánh:
+ Cài đặt: Giới hạn trên, dưới
+ Xuất ra: 3 cấp (Hi, In, Lo)
- Tín hiệu ra Analog: đo trên trở kháng (0 to 3.1V DC)
- Giao tiếp: I/O bên ngoài, RS-232C, Máy in (RS-232C)
- Nguồn: 100 to 240 V AC, 50/60 Hz, 30 VA max.
- Kích thước: 215x80x295mm
- Khối lượng: 2.4kg
- Thiết bị đi kèm: Dây nguồn x 1.
Máy đo Acquy Hioki BT3562
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| Max. applied measurement voltage | ± 60 VDC rated input voltage ± 70 VDC Max. rated voltage to earth |
|---|---|
| Resistance measurement ranges | 3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM) 3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM) Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range) Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges) |
| Voltage measurement ranges | 6 VDC (resolution 10 μV) to 60 VDC (resolution 100 μV), 2 ranges |
| Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM) | |
| Display | 31000 full digits (resistance), 600000 full digits (voltage), LED |
| Sampling rate | Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow) (Typ., sampling time depends on supply frequency settings and function.) |
| Measurement time | Response time + sampling rate, approx. 10 ms for measurements (Response time depends on reference values and the measurement object.) |
| Comparator functions | Judgment result: Hi/IN/Lo (resistance and voltage judged independently) Setting: Upper and lower limit, Deviation (%) from reference value Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results. Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.) |
| Analog output | Measured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only) |
| Interfaces | External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only) |
| Power supply | 100 to 240 VAC, 50/60 Hz, 30 VA max. |
| Dimensions and mass | 215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz) |
| Accessories | Instruction manual ×1, Power cord ×1 |
Measurement leads A
(for measuring high voltage batteries)
About probe length
A: From junction to probe
B: Probe part
L: Whole length
TIP PIN 9772-90
To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)
PIN TYPE LEAD L2100
A:300 mm (11.81 in), B:172 mm (6.77 in), L:1400 mm (4.59 ft), for high voltage battery measurements, 1000 V DC max.
Option
Can not be used for PIN TYPE LEAD 9770, 9771
0 ADJ BOARD Z5038
For L2110, L2020, 9465-10, 9772
Measurement Leads B (for measuring batteries up to 60 V)
1.8 mm dia. single-axis type for measuring small electrodes
About probe length
A: From junction to probe
B: Probe part
L: Whole length
PIN TYPE LEAD 9770
A:260 mm (10.24 in), B:140 mm (5.51 in), L:850 mm (2.79 ft), 70V DC
Measurement Leads B (for measuring batteries up to 60 V)
0.2 mm parallel pyramid-type pins for measuring at thru holes and sub-millimeter objects
About probe length
A: From junction to probe
B: Probe part
L: Whole length
PIN TYPE LEAD 9771
A:260 mm (10.24 in), B:138 mm (5.43 in), L:850 mm (2.79 ft), 70V DC
Measurement Leads C (for measuring batteries up to 60 V)
About probe length
A: From junction to probe
B: Probe part
L: Whole length
CLIP TYPE LEAD L2107
A: 130 mm (5.12 in), B:84 mm (3.31 in), L:1.1 m (3.61 ft), 70 V DC
FOUR TERMINAL LEAD 9453
A:280 mm (11.02 in), B:118 mm (4.65 in), L:1360 mm (4.46 ft), 60V DC
LARGE CLIP TYPE LEAD 9467
A: 300 mm (11.81 in), B: 131 mm (5.16 in), L: 1310 mm (4.30 ft), tip φ 29 mm (1.14 in), 50 V DC
PC communication
GP-IB CONNECTOR CABLE 9151-02
2 m (6.56 ft) length
RS-232C CABLE 9637
9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
Compatible products
Last update: June 15, 2018
SWITCH MAINFRAME SW1001
• Pair with a measuring instrument to achieve multi-channel capabilities • Max. 66 channels (2-wire) to max. 18 channels (4-terminal pair)
SWITCH MAINFRAME SW1002
• Pair with a measuring instrument to achieve multi-channel capabilities • Max. 264 channels (2-wire) to max. 72 channels (4-terminal pair)
Bảo đảm chất lượng
Sản phẩm bảo đảm chất lượng.
Hotline 24/7
Hotline: 085 996 3888
Sản phẩm chính hãng
Sản phẩm nhập khẩu chính hãng
