Máy đo độ ẩm ngũ cốc Delmhorst G-7 (9%-30%)

PRODUCT FEATURES

• Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat.
• Built-in temperature correction over the range of 32 - 160° F (0 - 70° C).
• Programmable offset to match elevator.
• Stores up to 150 accumulated readings in user-defined batches by grain.
• Displays the average and highest readings, and standard deviation and co-efficient of variance of stored readings.
• Audible, adjustable alarm alerts you when a pre-selected MC has been reached.
• Built-in connector accepts any Delmhorst electrode.
• Built-in calibration check.
• Moisture Range: 9%-30% MC, depending on the grain.
• Size: 7 1/4” x 6” x 5 1/2”.
• Weight: 4 lbs.
• Rugged construction ensures years of reliable use.
• Optional sturdy plastic carrying case.
• 9V battery.
• 1-year warranty.

G-7 ELECTRODES:

Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model:

1900

The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup.

313CUP-0005 Sample Cup

The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly.

313CUP-0006 Sample Cup

The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly.

315ELE-0024

The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup.

830 Series

Prods for testing standard and high density bales (requires H-4 Handle).

Available as:

• 830-2 – 10” prod 
• 830-3 – 18” prod 
• 830-4 – 36” prod 
• 830-5 – 12” for hops 

831 Short Pin Prod

For testing hay in the windrow (requires H-4 Handle).

832

Long pin prod – for testing grain in bulk (requires H-4 Handle).

H-4 Handle

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

Manual